Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Grantham, NH

Garage Door Panel Replacement in Grantham, NH

Dented, cracked or rusted sections replaced or repaired to match your door. Typical cost $300-$900.

Garage Door Panel Replacement is one of the most common calls we get. A technician will explain what is wrong and what it will cost before starting, and test the door before leaving. Dented, cracked or rusted sections replaced or repaired to match your door.

Is it time for garage door panel replacement?

  • Dents or creases from a vehicle, ball or hail
  • Cracked or split sections
  • Rust coming through the paint, often on the bottom panel
  • Panels bowing so the door binds

Why this happens

  • Impact from cars, equipment or storms
  • Moisture rusting the bottom panel
  • Wood panels rotting or splitting
  • An unbalanced door bending the top section

Before the technician arrives

  • Note the brand and model from the label on the door's edge or inside face.
  • Photograph the damage. It helps us match the panel.
  • Check whether the damage spreads across the hinge line.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

What happens during the visit

  1. Identify the door's brand, model, design and color
  2. Confirm the panel is still available, or price a replacement door if it isn't
  3. Remove the damaged section safely
  4. Install and align the new panel and hardware
  5. Rebalance the door, since panel weight can change

Discontinued panels can be hard to match. If several sections are damaged, a new door is often the better value.

How much does garage door panel replacement cost?

$300-$900Typical range, parts & labor
1-3 hours once the panel arrivesTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Serving Grantham, NH and nearby towns

Snowplows, ice and freeze-thaw cycles crack and dent the lowest panels first in New Hampshire, and moisture that gets behind a damaged bottom section rusts it from the inside.

Our garage door panel replacement service covers Grantham (ZIP code 03753) and nearby towns including Sunapee (7.5 mi), Newport (8.8 mi), Lebanon (12 mi) and Windsor, VT (12.4 mi). Call (833) 435-8883 to book a visit in Grantham.

Garage Door Panel Replacement: frequently asked questions

How much does garage door panel replacement cost in Grantham, NH?

Garage Door Panel Replacement typically costs $300-$900 including parts and labor, and usually takes 1-3 hours once the panel arrives. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do garage door panel replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is garage door panel replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where New Hampshire or Grantham requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Grantham, NH

CHI Overhead Doors Rolling Steel Door Repair

Rolling steel service doors, curtains, guides and springs repaired.

Typical $300-$1,500

Wayne Dalton Extension Spring Replacement

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $150-$350

Stanley Opener Circuit Board Replacement

Stanley garage door openers are no longer made. Compatible remotes and some parts are still available for older units.

Typical $175-$400

Overhead Door Garage Door Track Repair

Overhead Door traces its roots to C.G. Johnson, who invented the upward-acting garage door in 1921. The company builds residential and commercial doors and openers.

Typical $150-$400

Richards-Wilcox Garage Door Cable Repair

Frayed, snapped or slipped lift cables replaced and the door re-leveled.

Typical $150-$350

Off-Track Garage Door Repair

Doors that have come off their tracks secured, re-hung and realigned.

Typical $175-$450

Windsor Door Garage Door Roller Replacement

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers.

Typical $150-$350

CHI Overhead Doors Torsion Spring Replacement

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $200-$450

LiftMaster Opener Circuit Board Replacement

LiftMaster is the professional-installer brand of The Chamberlain Group. The color of the learn button on the motor unit shows which remotes are compatible (yellow on Security+ 2.0 models; purple, red, orange or green on older ones), and most current models work with the myQ app.

Typical $175-$400

Ryobi Smart Garage Door Opener Setup

Ryobi's garage door opener can use the brand's 18V ONE+ batteries as backup power and has accessory ports for add-ons.

Typical $100-$900

Linear Garage Door Opener Repair

Linear openers and remotes are now part of Nice North America. Linear's MegaCode remotes are common on older openers and gate systems.

Typical $125-$350

Sommer Garage Door Opener Repair

Sommer openers, made in Germany, put the motor on a carriage that travels along the rail instead of hanging from the ceiling, so servicing them is a little different from a conventional opener.

Typical $125-$350

Garage door stuck, noisy or broken?

Talk to a garage door technician in Grantham, NH now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote